Bridge Saw Blade UCS Diatex MITERcut

The Miter blade is the best bridge saw blade for straight and mitre cutting of most brands of ceramic slabs such as Dekton, Lapitec, Neolith, Laminam.

The blade body is reinforced and laminated which means it cuts perfect mitres and it is much less noisy than other blades. The outer part of the segment contains finer diamond to make it gentle on the edge of the slab to eliminate chipping. The middle part of the segment contains larger diamonds which make the blade able to cut these hard materials exceptionally well. The segments resist rounding and this help it cut straight.

  • Excellent results on Dekton, Lapitec, Neolith, Laminam and other ceramics
  • Sandwich construction segment for straight, chip free cutting
  • Less sharpening required
  • Only silent bodied mitre blade available, reducing vibration and noise for better cutting
  • 10mm segment height
  • For straight and mitre cutting

  • 50/60mm spacer

  • Brand: Diatex
  • Diamond Technology: Sintered
  • For Use On: All ceramic and ultra-compact materials
PRODUCT CODE2454225070
DIAMETER SIZE410mm410mm
TYPE OF CUTStraight and mitreStraight and mitre
RIM TYPESegmentedSegmented
SEGMENT HEIGHT10mm10mm
CORE TYPESilentSilent
FITTINGBore 50/60mmBore 50/60 Donatoni

  • This table shows recommended parameters for a cutting depth of 8mm, 12mm,20mm and 30mm ceramic
  • For mitre cutting, while entering and exiting the cut, reduce the feed rate by 40-50%
BLADE DIAMETERMATERIALTHICKNESSRPMFEED RATE
410mmCeramic8mm1700-21001.2 - 1.5m/min
410mmCeramic12mm1700-21001.0 - 1.2m/min
410mmCeramic20mm1700-21000.6 - 1.0m/min
410mmCeramic30mm1700-21000.4 - 0.6m/min

CE Standard, tested to: EN13236

Preliminary Safety Measures

  • Always read manufacturer instructions before use
  • To be used on static guarded machines only
  • Check blade visually before use: should it appear to have been damaged or to have suffered impact do not use
  • Before starting up the machine, check that: the blade is correctly clamped on the machine shaft and the protection systems are present, functioning and undamaged; if not, stop work
  • If the blade used is not silent bodied, the operator is advised to use ear muffs or other adequate protection
  • Excessive pressure, advance or depth of cut during operation can over heat and damage the blade and/or machine
  • The use of water coolant is necessary

Instructions for Using and Mounting the Blade

  • When mounted, the machine must be off and the rotation direction of the blade (see arrow on the blade body) must be the same rotation direction of the machine arbour
  • Check that the machine arbour is not damaged or worn: there must be no play in the couplings
  • Make sure that the flange and counter flange locking the blade are the same diameter and are perfectly flat, clean and tightened according to the machine manufacturer’s indications
  • Check that the water flow is enough for cooling of the blade
  • To obtain a smooth product finish, it is important for the disc to extend underneath the lower edge of the stone slab

Code
Kind
Diameter
Fitting
Quantity
Stock
Price
Code
24542
Kind
Silent
Diameter
Ø 400mm
Fitting
Bore 50/60mm
Quantity
Stock
Available to Ship
Note: Only 8 in Stock.
Remainder Available to Ship 39 Days After Order
Price
£238.07 Ex. VAT
Code
25070
Kind
Silent
Diameter
Ø 400mm
Fitting
Bore 50/60 Donatoni
Quantity
Stock
Available to Ship
Note: Only 7 in Stock.
Remainder Available to Ship 39 Days After Order
Price
£244.43 Ex. VAT
Shipping
Next day to UK
Order before 5:30pm

0

0.00 Ex. VAT

Quantity

Total

Ratings & Reviews

No reviews available

Be the first to Write a Review